<xs:simpleType name="DamageTypeCodeType">
  <xs:annotation>
    <xs:documentation>Represents a Damage Type Code identifying the reason for the repair.</xs:documentation>
  </xs:annotation>
  <xs:union memberTypes="CedexDamageTypeCode ValidDamageTypeCode"/>
</xs:simpleType>

<xs:simpleType name="CedexDamageTypeCode">
  <xs:annotation>
    <xs:documentation>Represents a Damage Type Code identifying the reason for the repair as defined by the ISO 9897:1997(E) Container equipment data exchange (CEDEX) - General communication codes published by the International Organization for Standardization. This definition enumerates all official procedural codes.</xs:documentation>
  </xs:annotation>
  <xs:restriction base="xs:string">
    <xs:enumeration value="BN">
      <xs:annotation>
        <xs:appinfo>Burned</xs:appinfo>
        <xs:documentation xml:lang="en">Component whose surface is damaged by burns (ISO 9897 numerical code 04069)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="BR">
      <xs:annotation>
        <xs:appinfo>Broken/split</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being broken or split (ISO 9897 numerical code 04060)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="BT">
      <xs:annotation>
        <xs:appinfo>Bent</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being bent (ISO 9897 numerical code 04020)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="BW">
      <xs:annotation>
        <xs:appinfo>Bowed</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being bowed. Usually damage is gradual over the length of the component (ISO 9897 numerical code 04030)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CD">
      <xs:annotation>
        <xs:appinfo>Consequential Damage</xs:appinfo>
        <xs:documentation xml:lang="en">Damage caused by failure to perform an adequate repair (ISO 9897 numerical code 04610)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CH">
      <xs:annotation>
        <xs:appinfo>Corroded/Holed</xs:appinfo>
        <xs:documentation xml:lang="en">Component is holed by corrosion (ISO 9897 numerical code 04112)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CK">
      <xs:annotation>
        <xs:appinfo>Cracked</xs:appinfo>
        <xs:documentation xml:lang="en">Crack apparent either in surface or through part or all of component profile (ISO 9897 numerical code 04115)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CL">
      <xs:annotation>
        <xs:appinfo>Compression line</xs:appinfo>
        <xs:documentation xml:lang="en">A series of dents in a straight line that decreases the strength of a component when it is placed in compression (ISO 9897 numerical code 04090)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CO">
      <xs:annotation>
        <xs:appinfo>Corroded/rusty</xs:appinfo>
        <xs:documentation xml:lang="en">Component is corroded or rusty (ISO 9897 numerical code 04110)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CT">
      <xs:annotation>
        <xs:appinfo>Contaminated</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment is rendered unsuitable for cargo because of contamination by chemicals or other cargo products, or by infestation (ISO 9897 numerical code 04100)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CU">
      <xs:annotation>
        <xs:appinfo>Cut</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being cut (ISO 9897 numerical code 04120)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="CW">
      <xs:annotation>
        <xs:appinfo>Cracked weld</xs:appinfo>
        <xs:documentation xml:lang="en">Welding seam is damaged by being cracked (ISO 9897 numerical code 04117)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="DB">
      <xs:annotation>
        <xs:appinfo>Debris/dunnage</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment is unusable due to cargo residue or dunnage left inside (ISO 9897 numerical code 04140)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="DH">
      <xs:annotation>
        <xs:appinfo>Dented and Holed</xs:appinfo>
        <xs:documentation xml:lang="en">Component is dented and holed (ISO 9897 numerical code 04162)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="DL">
      <xs:annotation>
        <xs:appinfo>Delaminated</xs:appinfo>
        <xs:documentation xml:lang="en">Component, usually of wood, is damaged due to separation of laminations (ISO 9897 numerical code 04150)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="DT">
      <xs:annotation>
        <xs:appinfo>Dent</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being dented (ISO 9897 numerical code 04160)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="DY">
      <xs:annotation>
        <xs:appinfo>Dirty</xs:appinfo>
        <xs:documentation xml:lang="en">Unclean condition that may affect utility of container (ISO 9897 numerical code 04165)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="FD">
      <xs:annotation>
        <xs:appinfo>Forklift Damage</xs:appinfo>
        <xs:documentation xml:lang="en">Impact or pressure damage caused by a forklift (ISO 9897 numerical code 04095)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="FQ">
      <xs:annotation>
        <xs:appinfo>Food Quality Required</xs:appinfo>
        <xs:documentation xml:lang="en">The condition of the container requires work to reach Food Grade Quality (ISO 9897 numerical code 04375)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="FZ">
      <xs:annotation>
        <xs:appinfo>Frozen/Seized</xs:appinfo>
        <xs:documentation xml:lang="en">Component is inoperable by being frozen or seized due to corrosion (ISO 9897 numerical code 04190)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="GD">
      <xs:annotation>
        <xs:appinfo>Gouged</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being gouged (ISO 9897 numerical code 04200)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="HO">
      <xs:annotation>
        <xs:appinfo>Holed</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being holed (ISO 9897 numerical code 04230)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="IC">
      <xs:annotation>
        <xs:appinfo>Improper Cleaning</xs:appinfo>
        <xs:documentation xml:lang="en">The component has had an inadequate cleaning procedure performed (ISO 9897 numerical code 04167)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="IN">
      <xs:annotation>
        <xs:appinfo>New Improper Repair</xs:appinfo>
        <xs:documentation xml:lang="en">A repair performed during the most recent lease that does not conform to owner's requirements or industry standards (ISO 9897 numerical code 04245)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="IR">
      <xs:annotation>
        <xs:appinfo>Improper repair</xs:appinfo>
        <xs:documentation xml:lang="en">A repair that does not conform to owner's requirements or industry standards (ISO 9897 numerical code 04240)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="LO">
      <xs:annotation>
        <xs:appinfo>Loose</xs:appinfo>
        <xs:documentation xml:lang="en">Component is loose (ISO 9897 numerical code 04260)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="ME">
      <xs:annotation>
        <xs:appinfo>Existing Manufacturing Defect</xs:appinfo>
        <xs:documentation xml:lang="en">A manufacturing defect which is documented and known about by the owner (ISO 9897 numerical code 4590)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="ML">
      <xs:annotation>
        <xs:appinfo>Markings/labels</xs:appinfo>
        <xs:documentation xml:lang="en">Labels, marks, logos, and graffiti, etc., not required by owner (ISO 9897 numerical code 04280)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="MN">
      <xs:annotation>
        <xs:appinfo>New Manufacturing Defect</xs:appinfo>
        <xs:documentation xml:lang="en">A potential or actual defect which may result from the manufacturing process and is not known about by the owner (ISO 9897 numerical code 04595)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="MS">
      <xs:annotation>
        <xs:appinfo>Missing/lost</xs:appinfo>
        <xs:documentation xml:lang="en">Component is missing or lost (ISO 9897 numerical code 04320)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="NI">
      <xs:annotation>
        <xs:appinfo>Not within ISO dimensions</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment is not usable because it is no longer within the ISO dimensional envelope (ISO 9897 numerical code 04340)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="NO">
      <xs:annotation>
        <xs:appinfo>Not as required by owner</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment or component no longer complies with owner's requirements (0ISO 9897 numerical code 4360)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="NP">
      <xs:annotation>
        <xs:appinfo>Container not in place</xs:appinfo>
        <xs:documentation xml:lang="en">Handling needed for e.g. inspection, pho-tos, repairs or num release (ISO 9897 numerical code 04366)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="NT">
      <xs:annotation>
        <xs:appinfo>Not to TIR requirements</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment or component no longer complies with TIR regulations (ISO 9897 numerical code 04350)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="NV">
      <xs:annotation>
        <xs:appinfo>Not as required by user</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment or component no longer complies with user's requirements (ISO 9897 numerical code 04365)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OD">
      <xs:annotation>
        <xs:appinfo>Out-of-date</xs:appinfo>
        <xs:documentation xml:lang="en">Renewal of a periodic inspection, test or document is overdue (ISO 9897 numerical code 04410)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OE">
      <xs:annotation>
        <xs:appinfo>Operator failure</xs:appinfo>
        <xs:documentation xml:lang="en">Damage has been caused by the operators failure to use the container correctly (ISO 9897 numerical code 04615)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OL">
      <xs:annotation>
        <xs:appinfo>Oil saturated</xs:appinfo>
        <xs:documentation xml:lang="en">Component, usually flooring, is damaged by being heavily contaminated with oil (ISO 9897 numerical code 04380)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OO">
      <xs:annotation>
        <xs:appinfo>Overhead Obstruction</xs:appinfo>
        <xs:documentation xml:lang="en">Damage usually to the upper sections of a container caused by impact with a structure such a bridge, (ISO 9897 numerical code 04025)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OR">
      <xs:annotation>
        <xs:appinfo>Odour</xs:appinfo>
        <xs:documentation xml:lang="en">Equipment is rendered unsuitable for cargo because of odour (ISO 9897 numerical code 04370)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OS">
      <xs:annotation>
        <xs:appinfo>Oil stains</xs:appinfo>
        <xs:documentation xml:lang="en">Component, usually flooring, is damaged by being spotted with oil (ISO 9897 numerical code 04390)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="OU">
      <xs:annotation>
        <xs:appinfo>Other unacceptable repairs</xs:appinfo>
        <xs:documentation xml:lang="en">Any repair deemed unacceptable by the owner or for reasons not specifically covered (ISO 9897 numerical code 04400)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="PF">
      <xs:annotation>
        <xs:appinfo>Paint failure</xs:appinfo>
        <xs:documentation xml:lang="en">Component suffers from a breakdown of the paint system (ISO 9897 numerical code 04520)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="PH">
      <xs:annotation>
        <xs:appinfo>Pin holes</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged with minute holes (ISO 9897 numerical code 04440)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="RA">
      <xs:annotation>
        <xs:appinfo>Remove For Access</xs:appinfo>
        <xs:documentation xml:lang="en">Removal of a component to facilitate either a repair or further inspection (ISO 9897 numerical code 04335)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="RC">
      <xs:annotation>
        <xs:appinfo>Conversion Required</xs:appinfo>
        <xs:documentation xml:lang="en">An alteration to the structure, rating, designation, etc as directed by the owner or operator (ISO 9897 numerical code 04362)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="RN">
      <xs:annotation>
        <xs:appinfo>Repair necessary</xs:appinfo>
        <xs:documentation xml:lang="en">Damage code for preparation times in combination with MCO 12 000 (ISO 9897 numerical code 04363)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="RO">
      <xs:annotation>
        <xs:appinfo>Rotted</xs:appinfo>
        <xs:documentation xml:lang="en">Component integrity compromised by rot (ISO 9897 numerical code 04445)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="RV">
      <xs:annotation>
        <xs:appinfo>Refurbishment Program</xs:appinfo>
        <xs:documentation xml:lang="en">A programme of refurbishment as directed by the owner or operator (ISO 9897 numerical code 04530)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="SR">
      <xs:annotation>
        <xs:appinfo>Shrunk</xs:appinfo>
        <xs:documentation xml:lang="en">Component, usually tarpaulin, cover, tilt, or flooring is damaged by shrinkage (ISO 9897 numerical code 04480)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="ST">
      <xs:annotation>
        <xs:appinfo>Saturated/Wet</xs:appinfo>
        <xs:documentation xml:lang="en">Excess moisture is present within the component. (ISO 9897 numerical code 04555)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="WA">
      <xs:annotation>
        <xs:appinfo>Warped</xs:appinfo>
        <xs:documentation xml:lang="en">Component is damaged by being warped (ISO 9897 numerical code 04540)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="WM">
      <xs:annotation>
        <xs:appinfo>Wrong material</xs:appinfo>
        <xs:documentation xml:lang="en">Previous repair or replacement was carried out using the wrong material (ISO 9897 numerical code 04580)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="WN">
      <xs:annotation>
        <xs:appinfo>Worn</xs:appinfo>
        <xs:documentation xml:lang="en">Component is rendered unusable by being worn. (ISO 9897 numerical code 04570)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="WT">
      <xs:annotation>
        <xs:appinfo>Wear and tear</xs:appinfo>
        <xs:documentation xml:lang="en">The unavoidable deterioration of a component during usage under proper operating conditions (ISO 9897 numerical code 04560)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
    <xs:enumeration value="ZZ">
      <xs:annotation>
        <xs:appinfo>Not applicable</xs:appinfo>
        <xs:documentation xml:lang="en">A condition for which no specific damage type applies (ISO 9897 numerical code 04355)</xs:documentation>
      </xs:annotation>
    </xs:enumeration>
  </xs:restriction>
</xs:simpleType>

<xs:simpleType name="ValidDamageTypeCode">
  <xs:annotation>
    <xs:documentation>Pattern representing the construction of a custom CEDEX Damage Type Code.</xs:documentation>
  </xs:annotation>
  <xs:restriction base="xs:string">
    <xs:pattern value="[a-zA-Z0-9][a-zA-Z0-9_\-]{1,2}"/>
  </xs:restriction>
</xs:simpleType>